Cara membuat USB Flashdisk bootable part II

1. Plug the USB key in.

2. If AutoPlay opens a pop-up for the USB key, then just close it.
NOTE: Make note of what the drive size is for the USB key for step 6 below. You can also open Computer (step 21) to see what the drive size is to. For example, mine is 3920 MB.

3. elevated command prompt.

4. In the elevated command prompt, type diskpart and press Enter. (See screenshot below)

5. In the elevated command prompt, type list disk and press Enter. (See screenshot below)
NOTE: Make note of what disk # your USB key is listed as for step 6 below. You can also look for the drive size (step 2) for the USB key to help ID the disk number. For example, mine is listed as Disk 1 here for the 3920 MB disk.

6. In the elevated command prompt, type select disk # (your USB disk #) and press Enter. (See screenshot below)
NOTE: You can also look for the drive size (step 2) for the USB key to help ID the disk number. For example, my USB key is listed as Disk 1, so I would type select disk 1 and press Enter.

7. In the elevated command prompt, type clean and press Enter. (See screenshot below)

8. In the elevated command prompt, type create partition primary and press Enter. (See screenshot below)

9. In the elevated command prompt, type select partition 1 and press Enter. (See screenshot below)

10. In the elevated command prompt, type active and press Enter. (See screenshot below)

11. In the elevated command prompt, type format fs=ntfs and press Enter. (See screenshot below)
NOTE: This may take a few moments to finish formatting the USB key.

12. If AutoPlay opens a pop-up for the USB key, then just close it.

13. In the elevated command prompt, type assign and press Enter. (See screenshot below)
NOTE: This will assign a new drive letter to the USB key. Make note of the new USB drive letter for step 19 below. For example, mine is now H.

14. If AutoPlay opens a pop-up for the USB key, then just close it.
NOTE: Make note of the new USB drive letter for step 18 below. For example, mine is now H.

15. In the elevated command prompt, type exit and press Enter. (See screenshot below)
NOTE: This will exit you from DiskPart from step 4.

16. Insert your retail Vista installation DVD into the DVD drive.

17. If AutoPlay opens a pop-up for the retail Vista installation DVD, then just close it.
NOTE: Make note of what the drive letter is for the DVD drive that has the retail Vista installation DVD in for step 19 below. You can also open Computer (step 21) to see what the drive letter is to. (See right screenshot below)

18. In the elevated command prompt, type cd\ and press Enter. (See screenshot below)

19. In the elevated command prompt, type F:\boot\bootsect.exe /nt60 H: and press Enter. (See screenshot below)
WARNING: Subtitute the letter F for your DVD drive letter (step 17), and substite H for your USB key drive letter (step 13).

20. When it finishes, close the elevated command prompt.

21. Open the Start Menu, and right click on the Computer button and click on Open.

22. Right click on the DVD drive (ex: F: ) that has the retail Vista installation DVD, and click on Open. (See screenshot below)

23. Highlight all of the contents, right click on the highlighted contents, and click on Copy. (See screenshot below)
NOTE: You will need to copy all of the files and folders on the retail Vista installation DVD to the USB key.

24. Go back to Computer, right click on the USB key drive (ex: H ), and click on Paste. (See screenshot below)

25. The contents of the retail Vista installation DVD will now start copying over to the USB key.
NOTE: This may take a few moments to complete.

26. When finished, you can close the Computer window and unplug the USB key.

27. You now have a Vista Installation USB key.

Source : http://www.vistax64.com/tutorials/181538-usb-bootable-vista-installation-flash-thumb-drive.html